Incest-Movies

The following sections give full details of the implementation (for completeness I have included both the circuit of a MAX232 based RS232 interface using a conventional +5V regulator and the design I actually used in my prototype). If you decide to build it directly from the schematic, remember to add decoupling capacitors (one 100nF capacitor per couple of chips is fine, but make sure the monostable in particular is well decoupled). The MIPI should look like a modem to the PC and therefore the most convenient connector to use is a standard 25-way D female as is normally fitted to modems. I find it convenient to strap the modem signals inside the interface so that I can use a standard modem cable.